Back

Electric hook tier York

Code: OE0027

User Manual electric tier :   1.) Press the black button SET in the direction of the arrow. Open the locking lever of tier and a red clip Plug in hook. Release the SET button, locking lever is closed and fastened the hook in the tier. Tip: hook is to dire... Full description

Manufacturer: York® Need help? +420604994440

Similar products

Hair Rigga Carp Zoom
In stock
Hair Rigga Carp Zoom

9,000 $

7,700 $

Very practical tool to create your own boilie rigs. Attach t...

Hook tier York - manual
In stock
Hook tier York - manual

1,800 $

1,400 $

Instructions for using the manual hook tier :   1st) Inser...

Loop maker + hook solver York
In stock
Loop maker + hook solver York

1,600 $

0,700 $

Very practical tool for fast and easy binding loops of diffe...

Loop tier Carp Zoom - 2 pcs
In stock
Loop tier Carp Zoom - 2 pcs

4,500 $

4,000 $

Very practical tool for fast and easy binding loops of diffe...

You might also be interested in

Battery AAA
In stock
Battery AAA

0,450 $

0,400 $

Specifications

Width 90,0 mm
Height 70,0 mm
Weight 80,0 g
Power supply 2x 1,5V - AAA

Product description

User Manual electric tier :

 

1.) Press the black button SET in the direction of the arrow. Open the locking lever of tier and a red clip Plug in hook. Release the SET button, locking lever is closed and fastened the hook in the tier. Tip: hook is to direct the tip downwards.

 

2.) The line clipped onto the fixing plate in the sprocket of tier (end of the line should be about 5 cm long). The line then put on top of the notch in the sprocket and pull it to the hook. Furthermore, we lead line around tier on the black slider (his default position must be at the bottom) and continues to lead the line on the left side around the hook back into the notch. The line must be tight.

 

3.) Using the button ON we will gear of tier to move and dragging around hook fishing line required number of turns.

 

4.) Black slider to flip the top position towards the notch on the sprocket - this will create a loop, which is then tightened. Tip: When tightening the loop is suitable hook to hold your fingers to not skewed.

 

5.) Pressing the button SET loosen lock paws, remove the hook and tighten the loop and cut off the excess end of the line. Rig is ready for use.

Evaluation

The product has not been evaluated. Be the first!

To rate you need to be registered.

      Registration