Set of bite alarms Delphin Coder 3 + 1
Delphin CODER is a set of electronic signaling devices with listening, where an ideal ratio of the favourable price with the performance is met. In particiular, its advantages are reliability and 100% functionality, easily comparable to more expensive sets... Full description Full description
Manufacturer: Delphin® Need help? +420604994440
Original price: 144,000 $
Similar products
You might also be interested in
Specifications
| Number of bite alarms | 3 |
| Volume of bite alarm | yes |
| Tone of bite alarm | no |
| Sensitivity of bite alarm | yes |
| Resolution direction of shot of bite alarm | yes |
| Waterproof of bite alarm | yes |
| Color diode of bite alarm | of your choice |
| Night light of bite alarm | yes |
| Integrated transmitter | yes |
| Power supply of bite indicator | 12V ( LR23A ) |
| Dimension of bite alarm | 105 x 43 x 30 mm |
| Weight of bite alarm | 52,0 g |
| Slot for swinger | yes - 2,5 mm |
| Spacing for rod | 15,0 mm |
| Volume of receiver | yes |
| Tone of receiver | yes |
| Number of connectable bite alarms | 4 |
| Outreach | 140 m |
| Vibration | yes |
| Power supply of receiver | 9V |
| Dimension of receiver | 102 x50 x 37 mm |
| Weight of receiver | 62,0 g |
| Waterproof of receiver | yes |
| Built-in motion sensor | no |
| Flashlight | no |
| Carrying case | yes |
| Case dimensions | 285 x 215 x 60 mm |
| Weight of set | 714,0 g |
Product description
Delphin CODER is a set of electronic signaling devices with listening, where an ideal ratio of the favourable price with the performance is met. In particiular, its advantages are reliability and 100% functionality, easily comparable to more expensive sets. Signal between the beacons and the monitor can be transmitted to a distance of up to 140 m in ideal conditions. The whole set comes in a hard plastic case that takes care of safety during transport.
The bite alarm is powered by a 1x12V battery type LR23A, which has a sufficiently long life. In the event of a low battery, the indicator will alert you with a short beep. Use the "V" switch to select one of the 5 volume levels, including a silent mode. It is also possible to select the desired tone and sensitivity level (in the range 1-9cm), which also has 5 different levels. An indisputable bonus of the signaling devices from the CODER set is the possibility to choose from 7 colours of the signaling LED diode. Everyone can choose their favorite and if you want to change, you can simply choose another colour as per the instructions. A different tone will alert you to the snapshot, and the memory LED will light for 15 seconds after each shot. At the bottom, there is an input for a 2.5 mm connector for connecting a light indicator. It is also possible to turn on the position diode during night fishing.
Listening reliably signals the shot by sound, light and, in the case of switching the lever to the right position, by vibration too. Using the "V" switch, it is possible to select one of the 5th volume levels, including the silent mode, and use the switch marked "T" to select the desired tone. The monitor has four color LEDs that light up continuously for 15 seconds after the shot. It is powered by a 1x9V battery. When its life is coming to an end, it will be indicated by a continuous short beep. The monitor, like the beacons, stores all selected settings.
It is possible to store the maximum configuration of 3 + 1 (3 pieces of signalers and one receiver) in the case of this set.
The Delphin CODER set can be paired with the LightCONTACT light.